 |
 |
| FK6.HY-2
High Speed Draw-Texturing Machine Model FK6.HY-2 High Speed Draw-texturing Machine, a machine based on years of close cooperation and a joint venture with Barmag, with new developments for texturing of continuous filament polyester yarns 30D to 300D, is especially suitable for micro filament or hi-count yarns. V or M-configuration, primary heater either contact or high temperature, suitable for high speed production. W2x, located between W2 and secondary heater is for the optimization of yarn tension to facilitate the production of intermingled yarn. |
 |
 |
On-line tension
device can check & monitor timely the yarn tension of each spindle, classify quality, grade packages, and count yarn breakage. Siemens touch screen for Process parameter input and control parameter display. |
Inclined style 8 friction unit with disks: 52 mm diameter, 9 mm high PU or ceramic Below: tension sensor |
 |
 |
Spandex feeding device for the economic production of air covered yarns |
Some of the team for the support of all customers |
 |