FK6-HY1 High-Speed
Draw Texturing Machine
The FK6 HY-1 high
speed draw-texturing machine was developed to process all available POY
at commercially obtainable maximum speeds. Optionally, multi-feed
and microfilament yarns can be textured. The machine has a very
solid structure and meets the requirements of large-scale filament
processing.
Features:
1)
With a product range of 55 – 330 dtex, maximum mechanical speed is
1,000m/min. This is higher than most commerical texturing speeds.
2)
The Style8 friction units offer a maximum speed of 20,000rpm
3)
Friction units Style8 can run 6mm or 9mm thick ceramic or PU disks,
suitable for all deniers and types of yarn; maximum configuration is
1-9-1
4)
The primary heater is 2.5m long for 'M' machines, and 2.0m for 'V'
machines; with temperature control from 160 – 250°C.
5)
The 1.46m long secondary convection heater is suitable for temperatures
from 160 – 250°C.
7)
Bobbin holder: lift arm type, turnover type
These machines can be
classified into models FK6 HY-1, FK6 HY-1A, FK6 HY (V)-1A, and FK6
HY-1AMF etc, according to machine layout and yarn path.
On
'V' machines, the yarn path of the primary heater, cooling plate and
friction unit is in a straight line and is thus suitable for
microfilament yarn.
'MF'
machines are
suitable for polyester microfilament texturing yarn, and are designed
for satisfying the requirements of both the domestic and overseas
markets. The inclined friction units optimize the yarn path, while the
nip rollers and twist stop rollers are most suitable for microfilament
yarn.
