|
|
FK6-HY2 High-Speed
Draw-Texturing Machine
The FK6 HY-2 high
speed draw-texturing machine was developed to process all available POY
at highest commercially obtainable speeds. Optionally the machine
can be equipped with double friction units for the economic production
of plied yarns. Microfilament yarns can be textured on V-type
machines. The machine has a very
solid structure and meets the requirements of large-scale filament
processing.
Features:
- A and B side of the machine are driven
independently by inverters allowing both sides to run different
processes.
- With a product range of 55 – 660 dtex per
position, maximum mechanical speed is
1,200m/min. This is higher than all commerical texturing speeds.
- All shafts are direct-driven, there are no
gearboxes or belts
- Friction units Style8 can run 6mm or 9mm thick
ceramic or PU disks,
suitable for all deniers and types of yarn; maximum configuration is
1-9-1
- Machines with double yarn paths will be
equipped with double friction units, double-yarn-path heaters and
double-yarn-path cooling plates
- The size of double friction unit disks may be
45 x 6mm or 48.6 x 9mm, with the maximum configuration reaching 1-9-1
- Optional pneumatic threading is available
- On-line yarn tension control is available
On
'V' machines, the yarn path of the primary heater, cooling plate and
friction unit is in a straight line and is thus suitable for
microfilament yarn.
'MF'
machines are
suitable for polyester microfilament texturing yarn, and are designed
for satisfying the requirements of both the domestic and overseas
markets. The inclined friction units optimize the yarn path, while the
nip rollers and twist stop rollers are most suitable for microfilament
yarn.
|
|
|
